Corporate News
Points to Note When Using a Wall-Mounted Boiler
Release Date:
2022/05/25 14:00
The days when heating relied on radiators in the north and stoves in the south are gradually fading away. Even in regions without central heating, wall‑mounted boilers offer a convenient, flexible, healthy, and comfortable heating solution, making them a popular choice for many households. Wall‑mounted boilers are sophisticated appliances that integrate water and electricity, so safety is of paramount importance. Today, Brother Song will share some essential safety tips and energy‑saving practices to help you enjoy a warm, comfortable home during the upcoming colder months. 1. Always use the type of gas specified on the product’s nameplate—natural gas, town gas, liquefied petroleum gas, biogas, etc.—and do not substitute it indiscriminately. 2. Install the boiler in the kitchen or on an enclosed balcony; never in a bathroom or bedroom. 3. When ambient temperatures may drop below freezing, keep the boiler powered on. In standby mode, as long as the gas supply remains unobstructed, the main circulation pipes are clear, and the heating system maintains normal water pressure, the boiler’s freeze‑protection feature and the pump’s anti‑interference safeguards will remain active. If any of these conditions are not met, the boiler, piping, or radiators could freeze and suffer damage, potentially leading to safety hazards. During winter, if there are prolonged power outages or extended periods when no one is home—when outdoor temperatures are likely to fall below freezing—you should drain the heating system to prevent ice‑related damage. 4. Replenish the system pressure to between 1.0 and 1.5 bar. Be sure to close the make‑up valve; otherwise, the overpressure safety valve may leak continuously, saturating indoor furnishings. If the pressure becomes too high during refilling, excess water can be released through the radiator’s drain or vent valves. While operating, the boiler’s internal pressure will naturally rise due to thermal expansion of the water—a perfectly normal phenomenon. Most wall‑mounted boilers come equipped with overpressure protection and pressure‑relief devices; when the system pressure exceeds the safe threshold, the unit will prompt you to reduce it. Improper installation of the flue system can cause smoke backflow and incomplete combustion. Incomplete combustion leads to oxygen depletion indoors, which can harm occupants’ health. Therefore, we recommend using the original chimney or flue provided by the manufacturer and avoiding unauthorized alterations to its position. If relocation or repositioning is necessary, contact qualified service personnel for professional assistance. Household wall‑mounted boilers are typically installed in kitchens, where refrigerators, ovens, induction cookers, and other appliances are also commonly found. These appliances emit strong electromagnetic radiation. When using such high‑radiation devices, maintain a reasonable distance from the boiler to avoid interfering with its proper operation.
See more...
Disclaimer: This content is reposted from the internet. This website does not own the rights to it and assumes no legal liability. If you discover any content on this site that may constitute plagiarism, please contact us to report it and provide relevant evidence. Upon verification, we will promptly remove any content suspected of infringement.
Previous post:
Next article: