Corporate News
Precautions for Installing a Wall-Mounted Boiler
Release Date:
2022/05/25 14:00
There are many considerations to keep in mind when installing a wall‑mounted boiler, and many people may not be fully aware of them. Below, we’ll provide a brief overview. Improper or unreasonable practices during installation are among the key factors that can seriously compromise the boiler’s smooth operation. Because the technical expertise of installation personnel varies widely, some boilers fail to function properly after being set up. Let’s take a look at the important points to consider during installation: 1. The boiler is installed as a standard gas water heater. 2. Central heating pipes and terminal devices are connected to the boiler’s piping system. 3. The boiler’s piping and terminal units are installed using a floor‑heating configuration. 4. Solar‑thermal systems, kitchen and bathroom fixtures, and building hydronic piping are also installed. During installation, it’s essential to ensure proper balance at each terminal. Pipes should be routed in parallel or series to every terminal—whether for underfloor heating or radiators—and the temperature difference between terminals should be kept as small as possible. This helps minimize the boiler’s temperature differential, ensuring that the outlet water temperature remains stable. If such imbalances occur, issues like dry‑burning or automatic shutdowns may arise. Therefore, preventive measures should be taken to avoid these problems. The above are the key points we’ve outlined for wall‑mounted boiler installation. We hope this information proves helpful.
See more...
Disclaimer: This content is reposted from the internet. This website does not own the rights to it and assumes no legal liability. If you discover any content on this site that may constitute plagiarism, please contact us to report it and provide relevant evidence. Upon verification, we will promptly remove any content suspected of infringement.
Next article: